Waldent Clinical Micromotor Complete Set

Waldent Clinical Micromotor 

Waldent Clinical Micromotor is designed to facilitate more user-comfortability for the professional and a significant reduction in procedural times for their patients.

• Waldent Clinical Micromotor used for hard tissue trimming (teeth, bone).
• It is also used in denture trimming Polishing of prosthesis.

COMPOSITION:

• Made up of high-quality material.

INDICATION:

•  A dental drill or handpiece is a hand-held, a mechanical instrument used to perform a variety of common dental procedures including removing decay, polishing fillings, and altering prosthesis.

ADVANTAGES:

• High-powered 35,000rpm.
• Tool exchange method using cam (twist the handle counter-clockwise to change the bur and can be easily restored back to the original position).
• Non-stage speed system(it’s well designed to output from zero to 35,000rpm by using a non-stage speed system).
• Right & Left turning ability.
• Foot ON/OFF switch system.
• Products not only with dental technicians polished it can also apply precious stones, polishing, fine polished wood with other industries.
• Advanced motor technology, for a variety of material processing services.
• Continuously variable-speed control, the protection of a plastic shell, control box with strong, positive and negative direction of rotation switch.
• Foot speed or foot-operated control switch (option) / foot-operated switch.

• Speed upto 35,000 RPM.
• Forward & reverse direction selection.
• Hand & foot operation.
• Extra torque for smooth working.
• Low heat generation suitable for long use.
• No noise & vibrations.

THECHNICAL SPECIFICATION

STEP 1:

• Check that the power switch is set to an OFF position.

STEP 2:

• Confirm adequate power line voltage (100V to 240V).

STEP 3:

•  Connect the power supply to the electrical mains.

STEP 4:

• Connect the power cord to the EndoStation by inserting the connector into the receptacle on the rear aspect of the device. Make sure the power cord is well-fitted.

STEP 5:

•  Place the footswitch properly to allow easy operation.

STEP 6:

• Connect the footswitch cord into the receptacle at the front panel of the device.

STEP 7:

•  Pay attention to align the plug with its receptacle.

STEP 8:

• Plug the micromotor cord to the device.

STEP 9:

•  Pay attention to align the plug with its receptacle.

STEP 10:

• Plug the E-type contra-angle handpiece onto the micromotor and the handpiece head to the handpiece, if applicable.

• Manufacturer/Importer warranty of 1 Year as applicable for this product.
• Service and Warranty are handled by the manufacturer/importer directly for this product